Cable Type with Digital Read-out - CP2905-15

Cable Type with Digital Read-out - CP2905-15

Click for larger image and other views

  • CP2905-15 adjuster image.jpg
  • CP2905-15-1.jpg
  • CP2905-15-2.jpg
General Description:
CP2905-15 Incorporates the CP2905-8 balance bar adjuster. The balance bar digital read-out provides the user with an accurate indication of exact position of the balance bar to the right of the left of centre. The illuminated display is mounted in a plastic housing with two fixing points for mounting to the dashboard and is supplied with approximately 18" of cable to the transducer.

Mounting:
The  adjuster body can be fitted through a Ø19mm hole in the dashboard or bulkhead also using the mounting plate for increased security.

Installation of Adjuster Cables:
Ensure that the balance bar is correctly installed and turns freely (see installation drawing in downloads area).
The cable should not be installed with any bends of less than 50mm (2") radius otherwise wind-up may occur. for maximum stiffness the outer cable should be securely fastened in place along its complete length using the clips provided. Cut the cable to the required length preferably using an elastic grinding wheel, secure end fitting to balance bar, insert cable and lock in place with grub screw.
Click on the link to download the relevant drawing
CP2905-15 Installation Drawing